CHS Multi-Heater System for 600 x 600 Ceiling Grid, Fan assisted heaters by BN Thermic

Product selector

CHS

Multi-Heater System for 600 x 600 Ceiling Grid

Fastest possible installation time for a multi-heater system
Efficient and economic temperature control without the need for external contactors or relays
Providing warm inviting commercial premises
Ceiling mounting position allows free use of floor and wall space, an important consideration in retail premises
First class whole life value from a product built to the highest possible standard and designed to give many years of trouble free service

Typical Application

Larger retail outlets requiring a number of heaters

The CHS System

The CHS system allows a group of ceiling heaters and optional overdoor heater to be controlled by a single CS-1 remote mounted controller and/or a single remote mounted thermostat. The CHS system comprises one ‘master’ heater and any quantity of ‘slave’ heaters.

Features

Designed to rest in the T bar of a 600 x 600 suspended ceiling grid
Air inlet and outlet through front panel – no requirement for air supply from the ceiling void
White aluminium egg-crate diffuser
Pre-wired to rear mounted terminal enclosures
Auto-reset over-temperature protection
Insert Depth only 153mm
Simple reduction of output to 2kW by removal of link in rear mounted enclosure

Specification

Model	Output (kW)	Volts	Master/Slave	Mounting Height (m)
CHS-30M	3.0	230	Master	2.5 - 3.0
CHS-30S	3.0	230	Slave	2.5 - 3.0

Control Device Options

Select CS-1 wall mounted controller and/or from a choice of two thermostats

CS-1

A CS-1 wall-mounted controller provides on/off/high heat/low heat/fan-only settings. It can be used as the sole means of controlling a CHS system or in conjunction with a Tamperproof Control Device or PROSTAT-7 Programmable Thermostat.

HC-T2 Hard Case Electronic Control Device

The HC-T2 Electronic Control Device is tamperproof and vandal resistant and provides extremely accurate temperature control. Hard Case’s tamperproof design ensures that only authorised personnel can adjust the temperature setting. The HC-T2 can be used as the sole means of controlling a CHS system or in conjunction with a CS-1 controller.

PROSTAT-7

The PROSTAT-7 is a 7-day programmable thermostat. All 7 days can be individually programmed with up to 6 settings per day. The thermostat is powered by 3 x AA batteries (supplied). The PROSTAT-7 can be used as the sole means of controlling a CHS system or in conjunction with a CS-1 controller.