.jpg)
FFIH
Recessed floor fan assisted heaters
Application
This discreet space heater is mounted in the floor so that only the grille is visible. Thus the FFIH provides an almost invisible source of heat and does not occupy valuable wall space. These heaters are commonly used at the base of a glazed wall where they can offset down draughts and prevent condensation.
Features
- 5 year warranty
- Air inlet and outlet from top grille - no requirement for an underfloor air supply
- Two over temperature protection devices. These devices will isolate the heater should the grille be covered. The device with the lower temperature setting will automatically reset once the obstruction has been removed. Should temperatures continue to rise, the second device will operate. The device requires a manual reset to re-energise the heater.
- Tough heavy gauge grille capable of taking foot traffic and removable for cleaning
- Mesh screen positioned below the grille to prevent foreign objects from dropping into the heater
- Almond (RAL 9001) paint finish
Specification
| Model | Output (kW) |
Volts | Airflow (m3/h) |
Dimensions (mm) | Weight (kg) |
||
|---|---|---|---|---|---|---|---|
| H | W | D | |||||
| FFIH-1024 | 1.0 | 230 | 135 | 199 | 400 | 225 | 8 |
| FFIH-1524 | 1.5 | 230 | 135 | 199 | 400 | 225 | 8 |
FFIH-1024 Control Options
- Wall mounted thermostat controlling one or two heaters directly or a larger group of heaters via a suitably rated contactor or relay. Ref. RST-IN
- Wall mounted (semi-recessed), 7 day programmable, electronic thermostat controlling one, two or three heaters directly or a larger group of heaters via a suitably rated solid state relay or contactor. When using a contactor we recommend that a suitable snubber is installed in the control circuit. Ref. H16C
FFIH-1524 Control Options
- Wall mounted thermostat controlling a single heater directly or a group of heaters via a suitably rated contactor or relay. Ref. RST-IN
- Wall mounted (semi-recessed), 7 day programmable, electronic thermostat controlling one or two heaters directly or a larger group of heaters via a suitably rated solid state relay or contactor. When using a contactor we recommend that a suitable snubber is installed in the control circuit. Ref. H16C