.jpg)
730T as overdoor heater
730T as space heater
730 Mounting System
700 Series
High level/overdoor fan assisted heaters
Application
These stylish fan assisted heaters can be mounted over a door to offset the heat losses associated with frequently opening doors. Alternatively they can be used as general space heaters. Typical applications include shops, cafes, waiting rooms and workshops.
Features common to all models
- Dual function mounting bracket.
- Vertical discharge for overdoor mounting and adjustable angle discharge for general space heating
- Attractive white RAL9010 finish
- Autoreset over temperature protection
730 - Standard model - Specific features
- 1m 3 core cable.
- Heater front switch with 'on'/'off'/'fan only' settings
730T - Integral thermostat - Specific features
- 1m 3 core cable
- Heater front switch with 'on'/'off' settings
- Built-in electronic thermostat with heater front knob for set-point adjustment. once theheater has been energised, the fan will run continuously. The thermostat will monitor the temperature of the air being drawn into the heater and control the heater output to maintain the required air temperature.
730R - Remote Switching -Specific features
- 1m 5 core cable
- No control switches on heater front
- Designed specifically for use with the CS-1 wall-mounted control box providing 'on'/'off'/'High/'Low'/'fan only' settings
745 - 4.5kW - Specific features
- 1m 3 core cable
- Heater front switch with 'off'/half heat'/'full heat' settings
760 - 6kW - Specific features
- 1m 4mm 3 core cable
- Heater front switch with 'on'/'off'/'fan only' settings
- Built-in control contactor
- Rear mounted external connector to allow heater to be controlled by a conventional thermostat via the built-contactor. The fan will run continuously while the heating elements are controlled by the thermostat
Specification
| Model | Output (kW) |
Volts | Dimensions (mm) | Mounting Height(m) |
Airflow (m3/h) |
Weight (kg) |
||
|---|---|---|---|---|---|---|---|---|
| H | W | D | ||||||
| 730 | 3.0 | 230 | 225 | 635 | 108 | 1.8-3.0 | 250 | 7 |
| 730T | 3.0 | 230 | 225 | 635 | 108 | 1.8-3.0 | 250 | 7 |
| 730R | 3.0 | 230 | 225 | 635 | 108 | 1.8-3.0 | 250 | 7 |
| 745 | 4.5 | 230 | 225 | 635 | 108 | 1.8-3.0 | 255 | 9 |
| 760 | 6.0 | 230 | 225 | 1105 | 108 | 2.5-3.0 | 500 | 14 |
730/745 Control options
- Wall mounted thermostat controlling a heater or a group of heaters via a suitably rated contactor or relay. Ref. RST-IN
- Wall mounted (semi-recessed), 7 day programmable, electronic thermostat controlling an individual heater directly or a group of heaters via a suitably rated solid state relay or contactor. When using a contactor we recommend that a suitable snubber is installed in the control circuit. Ref. H16C
730R Control options
- This heater must be used with a CS-1 controller. The controller is surface mounted and provides 'on'/'off'/'High'/'Low'/'fan only settings. 5 core cable will be required to connect the heater to the controller. Ref. CS-1
760 Control options
- Wall mounted thermostat controlling a heater or a group of heaters via a suitably rated contactor or relay.Ref. RST-IN
- Wall mounted (semi-recessed), 7 day programmable, electronic thermostat controlling a heater or a group of heaters via the heaters built-incontactor. We recommend that a suitable snubber is installed in the control circuit. A rear mounted external connector is provided on the 760 to facilitate connection. Ref. H16C