HWP2-W
HWP2-B
Area covered by the heater
HWP2
Weather Resistant Halogen Heaters
Application
The HWP2 halogen heater provides safe and instant warmth in a variety of outdoor environments. It emits short wave radiant energy that cannot be 'blown off course' by a breeze and is ideally suited to applications such as patios, pub gardens, pavement cafés, golf driving ranges and outdoor smoking areas.
Features
- Powerful 1.5kW output
- Economical - running costs approximately one third of equivalent gas heater
- 5,000 hour lamp life - approximately five times longer than with glass fronted heaters
- Stylish design with choice of white or black finish
- Completely safe to use and leave outdoors
- Weatherproofed to IP55
- 2m power lead
- Wall and parasol brackets supplied as standard
- Halogen lamp is easy to replace
Specification
| Model | Output (kW) |
Voltage
|
Dimensions (mm) | Weight (kg) |
Colour | ||
|---|---|---|---|---|---|---|---|
| H | W | D | |||||
| HWP2-W | 1.5 | 230 | 480 | 120 | 120 | 1.7 | White |
| HWP2-B | 1.5 | 230 | 480 | 120 | 120 | 1.7 | Black |
| HWP2-2B | 2.0 | 230 | 480 | 120 | 120 | 1.7 | Black |
| HWP-L | 1.5kW Replacement Halogen Lamp | ||||||
| HWP2-L | 2kW Replacement Halogen Lamp | ||||||
Area covered by the heater
| Wall Mounted | Area Covered | |||
|---|---|---|---|---|
| H | X | Y | Z | |
| 2.0m | 2.3m | 2.4m | 4.0m | 7.6m |
| 2.5m | 3.0m | 3.0m | 5.2m | 12.3m |
Control Options
- Wall mounted movement sensor to ensure that heaters are not energised when an area is unoccupied. The device will switch loads of up to 16 amps (3kW 230V). Larger and three phase loads can be controlled via a suitably rated contactor. Ref. WH-402
- Wall mounted switch timer. capable of directly switching single phase loads up to 20 amps. Larger and three phase loads can be switched via a suitable contactor. The switch is tamper proof and weatherproof to IP54 making it ideal for installation in public areas such as pub gardens. Time delay can be adjusted between 10 and 150 minutes. Ref TS-2
- Combined dimmer and on/off switch controls loads of up to 13 amps (3kW 230V). This device allows the intensity of a halogen heater to be manually adjusted to suit prevailing conditions. Ref. VR-1