BN Thermic

HARD CASE CONTROLS

Electronic Thermostats for Industrial and Public Area Use

The Hard Case Range Provides

• Accurate temperature control in industrial installations and public areas
• Electronic control accurate to within ±0.5°C
• Adjustment knobs are only accessible after removing the tamperproof lid
• External sensor suitable for use with all heating systems including radiant

  systems

• Super robust vandal proof die-cast aluminium enclosure
• 5 Year Warranty
• The ideal thermostats for the BN Thermic range of industrial electric heating

 

HC-T1 Standard Thermostat
(use suffix /R for use with remote sensor)

Our basic thermostat with adjustable range 12°C to 25°C.

 

HC-TF1 Frost Thermostat
(use suffix /R for use with remote sensor)

A basic thermosat for frost protection with adjustable range 0°C to 11°C.

 

HC-SB1 Standard Set-Back Thermostat
(use suffix /R for use with remote sensor)

An external switch allows easy selection between high and low temperature.

Low temperature can be up to 15°C below high temperature set point.

HC-ST1 Set –Back Thermostat with Run-Down Timer
(use suffix /R for use with remote sensor)

External button allows high temperature to be selected. The thermostat will

automatically revert to low temperature after a pre-selected time period

(1/2, 1, 2 or 4 hours). Ideal for maintenance work or for use in community halls.

 

HC-SR1 Set-Back Thermostat for use with External Timer
(use suffix /R for use with remote sensor)

Switches between high and low temperature as dictated by a remote timer (by

others) or other ‘zero-volt’ switching device such as a PIR.

Energy saving system ideal when comfort heat is required during working hours

and frost protection is required at other times.

 

HC-S1

Standard remote sensor for use with all /R Hard Case thermostats

75mm x 51mm x 28mm

HC-SW1

Weatherproof remote sensor for use with all /R Hard Case thermostats IP55

105mm x 105mm x 55mm

HC-D Special screwdriver for Hard Case tamper-proof screws

Special tool allowing access to adjustment knobs

Standard Specification

Adjustable Range	12 to 25°C
Adjustable set back (where applicable)	Up to 15°C below high temperature set-point
Power supply	230V
Output switch rating	16A
Output switch type	Changeover
Adjustable differential	0.25°C to 5°C
Weight	0.33kg
Dimensions	120 x 95 x 36.5

Download a PDF specification for easy printing

Download a PDF of our instruction sheet