- HWP patio heaters are a stylish means of providing comfort heat in outdoor or indoor locations
- Professional quality patio heaters suitable for both domestic and commercial applications including pub gardens, pavement cafes and golf driving ranges
- Completely safe to install and leave outdoors all year round
- Now available in Magic Lamp format with a barely perceptible pink glow (click here for details)
Range & Prices
The prices shown are list prices and perfectly safe to use for budget purposes. Contact your electrical wholesaler for final prices.
|HWP2-45B||4.5||230 or 400/3N||Black||£353.00|
Models with Magic Lamps
(click here for details)
2kW patio heaters keeping golfers warm at a driving range
HWP2-S heaters providing instant heat in the smartest-looking smoking area we’ve ever seen!
|Finish:||Epoxy polyester powder coating|
|Lamp:||Frosted halogen lamp (1.5kW heaters) also available in Magic Lamp format
Gold filtered halogen lamp (heaters 2kW and above)
All lamps replaceable
7000 hours average life
95% of output is useful infrared energy
Electro anodised aluminium press-formed parabolic reflector
Stainless steel safety guard
|Mounting:||Steel wall bracket providing ‘up and down’ angle adjustment
Lugs for suspension
|Electrical connections:||3m high temperature cable fitted to all heaters|
HWP2 outside a Mexican steak house
|HWP2-45B||4.5||230 or 400/3N||Black||1440||125||125||4.5|
|RL15CW||1500W||HWP2-B/W/S (one lamp per heater)|
|RL15MW||1500W||HWP2-BM/WM/SM (one lamp per heater)|
|RL20GW||2000W||HWP2-2B/W (one lamp per heater)|
|RL15GW/3||3000W||HWP2-3B/W (two lamps per heater)|
|RL15GW||1500W||HWP2-45B (central lamp of three)|
|RL15GW/4||1500W||HWP2-45B (two outside lamps)|
If you would like the experts at BN Thermic to select a suitable heating for your application, please click below to access our enquiry form. Simply provide as much information as you have available and we will respond with a detailed proposal.
Selecting HWP patio heaters
Use the following diagrams and tables to select the optimum mounting position.
In an exposed location and where mounting height is relatively high, we recommend installing a 2kW, 3kW or 4.5kW heater.
Area Covered – Wall Mounted
Area Covered – Overhead Mounted
|kW||H (m)||X(m)||Y(m)||Area (m²)|
|1.5 or 2||2.0||3.6||2.5||9.0|
|1.5 or 2||2.5||4.8||3.5||16.8|
HWP patio heaters heat people directly without the need to build up and maintain a body of warm air. For this reason thermostatic control is rarely appropriate. The following control options will greatly improve economy by ensuring that unoccupied areas are not heated.
TS-6 Push Button Timer (pre-programmed time delay)
The TS-6 is a compact surface-mount, weatherproof device which will energise a heater or heaters for a pre-programmed period between 2 minutes and 2 hours. Once this period has elapsed the heating will automatically be switched off until the button is pushed again. The TS-6 is rated IP66 making it safe for outdoor use.
The TS-6 can switch loads up to 3kW directly and is touch activated for easy operation.
TS-5 High Capacity Soft Start Timer
The TS-5 timer is designed for direct switching of patio heaters with a combined load of up to 6kW. The time delay period can be adjusted from 5 minutes to 70 minutes and once this time period has elapsed the heating will be switched off automatically. The built-in triac provides ‘soft start’ prolonging lamp life and reducing stress on the mains supply. The TS-5 includes terminals allowing the device to be connected to a remote programmable timer and/or a thermostat.
The TS-5 is rated IP55 making it safe for outdoor installation.
WH-402 Movement Sensor
The WH-402 is a compact, surface mount, weatherproof device which can detect movement up to 12m from its mounting position in a 180° arc. Both distance and angle of detection can be reduced. Once movement has been detected the heating will be switched on. If no further movement is detected within a pre-programmed period (between 5 seconds and 18 minutes)the heating will be automatically switched off. The WH-402 is rated IP55 making it safe for outdoor use.
The WH-402 can switch loads up to 3kW directly and larger loads via a suitable contactor.
The VR-2 can control the intensity of the output from infrared halogen heaters up to 3kW. A simple panel front knob provides 30% to 100% adjustment. It also proves a convenient means of isolating the heater with a definite ‘click’ to off.