RP2-03 provides an almost invisible source of gentle radiant heat
- RP radiant ceiling panels provide an economic means of heating a commercial space without producing noise or draughts
- Typical applications include care homes, offices and meeting rooms
- High mounting position means that it is impossible for people to accidently come into contact with the source of heat. For this reason RP radiant ceiling panels are an ideal heating system for care homes.
- RP radiant ceiling panels are designed to fit snuggly into a suspended ceiling grid but can just as easily be fitted to a conventional ceiling using the optional low-profile bracket.
Range & Prices
The prices shown are list prices and perfectly safe to use for budget purposes. Contact your electrical wholesaler for final prices.
|Model||kW||Size (mm)||IP55||List Price|
|RP2-03||0.3||595 x 595||No||£179.00|
|RP2-06||0.6||1195 x 595||No||£268.00|
|RP2-03IP||0.3||595 x 595||Yes||£214.00|
|RP2-06IP||0.6||1195 x 595||Yes||£324.00|
|RPB||Optional ceiling bracket for all models||£14.00|
RP2-06 Radiant ceiling panel
|Colour:||White front panel
Natural zinc coated steel rear panel
|Construction:||0.8mm steel heat emitting surface
0.6mm steel upper casing
Fully insulated to minimise upward heat loss
|Heating Element:||Fully sealed polyester heating film|
|Ingress Protection:||IP55 (models with IP suffix only)|
|Installation:||Direct installation into suspended ceiling T-bar or ceiling mounted using optional low-profile H bracket|
|Electrical Connection:||1.5m pre-wired heat resistant cable|
Radiant panels omit no noise, light or draught output making them ideal for office environments
Radiant panels can be easily sterilized making them ideal for installation in hospitals, pharmacies and care homes
|Model||kW||Volts||L (mm)||W (mm)||D (mm)||Weight (kg)||Recommended
Mounting Height (m)
Typically, radiant ceiling panels ae controlled by a wall-mounted programmable thermostat. Depending on the quantity and type of radiant ceiling panel installed, the thermostat can switch the heaters directly or via a suitably rated thermostat.
Depending on the application, a conventional room thermostat may be more suitable.
|Thermostat||Electronic programmable thermostat with optimum start function 6A||PROSTAT2||£100.00|
|Thermostat||Electronic programmable thermostat with optimum start and open window detection functions (can be used with remote mounted sensor) 16A||RT16||£113.00|
|Remote Sensor||Optional remote-mounted ‘black bulb’ temperature sensor for use with RT16 programmable thermostat||BBS||£53.00|
|Thermostat||Standard room thermostat 20A||RST2-IN||£94.00|
|Thermostat||Tamperproof thermostat 20A||RST-TP||£101.00|
Radiant panels are designed for easy install into grid ceilings. Brackets are also available if surface mounting is required
If you would like the experts at BN Thermic to select a suitable heating for your application, please click below to access our enquiry form. Simply provide as much information as you have available and we will respond with a detailed proposal.
For maximum economy and performance your selection needs to meet two requirements:
- Sufficient kW output
- Correct panel distribution
Estimating kW Output
In simple terms the output of the installed RP ceiling panels must be greater than the heat losses from the building during periods of cold weather. A small amount of heat is lost through the walls, ceilings and floors with more significant losses through windows and doors.
To estimate the heat loss from your building you may like to use our heat calculation tool
The estimated heat loss figure is the absolute minimum kW output that you should consider installing. We would suggest adding approximately 50% to this figure to allow for an acceptable warm up time in cold conditions as well as making allowances for exceptional weather conditions and possible errors in the original data used in the estimate.
Correct Panel Distribution
Having established the minimum kW requirement, select the minimum number of panels whilst ensuring that the distance between individual panels does not exceed the distance between the panels and the floor. When installing the panels into a suspended ceiling the choice of model will be dictated by the dimensions of the ceiling grid.
Radiant ceiling panels, ceiling mounted so that the distance between the panels (dimensions A+B) is no greater than the distance between the panels and the floor (dimension C).
RP2-06 radiant panels providing an economic and stylish means of heating a flying school in Sussex