Close
Skip to content

HC Halogen Heater Control Panel

HC Halogen Heater Control Panel
  • Provides central control for a group of halogen heaters
  • Allows easy adjustment of heat intensity
  • Control connections by Cat5 data cable for quick error-free installation

Range & Prices

The prices shown are list prices and perfectly safe to use for budget purposes. Contact your electrical wholesaler for final prices.

Model Description List Price
HC2 Control panel for up to six 3kW Heaters £620.00
HC3 Control panel for up to four 4.5kW or 6kW Heaters £620.00
HC-C1 Controller £130.00

Ancillary System Components

Model Description List Price
HC-B Push button to activate run-down timer £52.00
FST2-IN Optional frost thermostat £88.00
DX05 Cat5 cable terminated 5m £8.00
DX10 Cat5 cable terminated 10m £12.00
DX20 Cat5 cable terminated 20m £18.00
JX1 Cat5 cable joiner £4.00

Operation

A control panel or a series of up to 10 control panels are connected to a controller using Cat5 data cable. Interconnection between control panels is also by Cat5 data cable.

Halogen heaters are wired to the control panel(s). The controller provides manual control of the halogen heaters enabling heat intensity to be adjusted.

The controller also has a built-in run-down timer that can be activated by an optional push-button. Once the selected run-down period has elapsed, the heaters will be automatically switched off.

If required, a frost thermostat can be connected to each control panel. This device will switch on the heaters if the air temperature drops to its set-point overriding the settings on the controller.

Controlling HN3-30 (3kW) Heaters each with 2 lamps

Each HC2 will control up to six heaters. The HC-C1 controller allows the heaters’ lamps to be switched individually meaning that outputs of 1.5kW or 3kW can be selected.

Controlling HN3-30 (3kW) heaters each with 2 lamps

For larger installations up to 10 control boxes can be connected in a control daisy-chain with each controlling up to six heaters.

Note: this system cannot be used with linear heaters.

Controlling HN3-45 (4.5kW) or HN3-60 (6kW) Heaters each with 3 lamps

Each HC3 will control up to four heaters. The HC-C1 controller allows the heaters’ lamps to be switched individually meaning that outputs of ⅓, ⅔ or full power can be selected.

Controlling HN3-45 (4.5kW) Heaters or HN3-60 (6kW) Heaters each with 3 lamps

For larger installations up to 10 control boxes can be connected in a control daisy-chain with each controlling up to four heaters.

Technical Specification

Model   HC2
Description Control Panel for 3kW (2 lamp) halogen heaters
Heaters controlled

HN3-30 3kW halogen heaters (6 max. per panel)

Not suitable for use with linear models

Up to 10 control panels can be linked using Cat5 data cable and controlled from a single controller

Controller Required HC-C1
Supply 400V 3ph and neutral
Dimensions 280mm (w) x 320mm (high) x 80mm (deep)
Weight 3.6kg
Features

Optional frost protection by connecting FST2-IN thermostat

Soft start prolongs halogen lamp life

Model   HC3
Description Control Panel for 4.5kW or 6kW (3lamp) halogen heaters
Heaters controlled

HN3-45 4.5kW halogen heaters or HN3-60 6kW halogen heaters (4 max. per panel)

Up to 10 control panels can be linked using Cat5 data cable and controlled from a single controller

Controller Required HC-C1
Supply 400V 3ph and neutral
Dimensions 280mm (w) x 320mm (high) x 80mm (deep)
Weight 3.6kg
Features

Optional frost protection by connecting FST2-IN thermostat

Soft start prolongs halogen lamp life

Model   HC-C1
Description Manual controller for use with HC2 and HC3 control panels
Settings
(when used with
HC2 control panel)
On/off/½ heat/full heat
All heaters in a control group will function identically
Settings
(when used with
HC3 control panel)
On/off/⅓ heat/⅔ heat/full heat
All heaters in a control group will function identically
Timer Run-down timer programmable between 5 minutes and 2 hours
Activated by optional HC-B push button
Supply Separate voltage supply not required
Supply provided by the control panel
Dimensions 120mm x 80mm x 40mm
Weight 0.1kg
Model   HC-B
Description Push button for use with HC-C1 controller
Function Activates controller’s run-down timer (5 – 120 Minutes)
Supply Separate voltage supply not required
Supply provided by the controller
Dimensions 80mm x 80mm x 34mm
Weight 0.1kg
Features Connection to controller via 150mm long pre-wired cable with 4-way plug
Constant light indicates ‘heaters on’
Flashing light indicates last minute of operation