- Adaptable high level fan heater for use as overdoor heater or general commercial space heater
- Ideal for shops and a wide range of commercial premises
- Smart modern appearance and manufactured in the UK to the highest possible quality
- Optional controller for variable output and fan only settings
- For multi heater systems we recommend SystemX
Range & Prices
The prices shown are list prices and perfectly safe to use for budget purposes. Contact your electrical wholesaler for final prices.
|Model||kW||Volts||Built-in Thermostat||List Price|
Each heater can be controlled by one wall-mounted controller and/or one thermostat.
Do not use room thermostat with ‘T’ suffix models as these heaters already have a built-in thermostat.
6kW and 9kW heaters have a built-in relay meaning that the minimum switching capacity of a suitable thermostat is reduced to 6kW (10A) and 9kW (3A)
|CS-7||Switch (on/off/high heat/low heat/fan only)||£87.00|
|RD16||Electronic programmable thermostat 16A (recessed)||£58.00|
|RT16||Electronic programmable thermostat 16A||£128.00|
|RT26||Electronic programmable thermostat 26A||£158.00|
|WD16||Wi-Fi electronic thermostat 16A (recessed – free app)||£117.00|
|WT16||Wi-Fi electronic thermostat 16A (free app)||£187.00|
|WT26||Wi-Fi electronic thermostat 26A (free app)||£220.00|
|RST2-IN||Mechanical thermostat 20A||£114.00|
|RST-TP||Mechanical thermostat – tamperproof 20A||£122.00|
A contactor can be used to enable a thermostat or timer to switch a load larger than its switching capacity.
|Colour:||White RAL9010 case with black grille|
|Finish:||Epoxy polyester powder coating|
|Construction:||0.9mm steel case with white plastic end caps|
Dual function steel brackets providing vertical air discharge or angled air discharge (9kW models – vertical discharge only)
Alternatively 2 x M8 threaded holes are provided for suspension from drop rods
Tangential fan with low noise aluminium fan blades
Shaded pole high performance motor
Factory lubricated bearings (servicing not required)
|Heating Element:||High quality nickel-chrome resistance wire supported by ceramic plates and fitted with an automatically resetting over-temperature device|
|Control (models with built-in thermostat)||On/off switch located on front panel|
|Temperature control by factory fitted electronic thermostat with panel front adjustment|
|Thermostat can switch heat and fan or heat only with fan running continuously. A switch is provided to select preferred mode.|
|Can be controlled by CS-7 wall mounted controller for on/off/high heat/low heat and fan only settings|
|Control (models without thermostat)||Temperature control can be provided by a room thermostat|
|Can be controlled by CS-7 wall mounted controller for on/off/high heat/low heat and fan only settings. CS-7 can be used in conjunction with a room thermostat|
2 rear mounted terminal enclosures provided (one for electrical supply and one for connection to remote-mounted control devices).
Links can be removed to reduce heater output (3kW to 2kW, 6kW to 4kW and 9kW to 6kW)
|dB*||Mounting Height (m)|
|830(T)||3||230||245||56||1.8 to 3.0|
|860(T)||6||230||490||58||1.8 to 3.0|
|890(T)||9||400/230||735||58||1.8 to 3.0|
* Noise levels are factory tested, not laboratory tested.
BN Thermic over door heaters are hand assembled in the UK and available from all UK electrical wholesalers
If you would like the experts at BN Thermic to select suitable heating for your application, please click here to access our enquiry form. Simply provide as much information as you have available and we will respond with a detailed proposal.
The 800 series can be used for two distinctly different applications: as an overdoor heater or as a general space heater.
Select a heater to suit the door width.
Generally overdoor heaters are selected without a built-in thermostat although this feature can be useful to prevent an excessively high air temperature when the heater is installed in a confined space such as the area between two sets of doors.
In simple terms the output of the 800 series heater or heaters must be greater than the heat losses from the building during periods of cold weather. A small amount of heat is lost through the walls, ceilings and floors with more significant losses through windows and doors.
To estimate the heat loss from your building you may like to use our heat calculation toolHeat Calculator
9kW over door heaters are often used in hotel foyer and office reception areas
The estimated heat loss figure is the absolute minimum kW output that you should consider installing. We would suggest adding approximately 50% to this figure to allow for an acceptable warm up time in cold conditions as well as making allowances for exceptional weather conditions and possible errors in the original data used in the estimate.
Having established the minimum kW output required, select the minimum number of heaters needed to meet the kW requirement.