- Control up to 12 overdoor heaters from a single point – ideal for shops
- All connections by Cat5 cable for super quick and error free installation
- Can be connected to any heater in the System X range – any combination – any sequence
Range & Prices
The prices shown are list prices and perfectly safe to use for budget purposes. Contact your electrical wholesaler for final prices.
Heaters
Model | kW | List Price |
XD30 | 3.0 | £590.00 |
XD60 | 6.0 | £859.00 |
XD90 | 9.0 | £1122.00 |
Control Components |
|||
Type | Description | Model |
List Price |
Controller | With thermostat On/off/high/low/fan only settings Open window detection |
CX1 |
£144.00 |
Controller | With tamper resistant thermostat On/off/high/low/fan only settings Open window detection |
CX2 |
£147.00 |
Controller | Without thermostat On/off/high/low/fan only settings |
CX3 |
£146.00 |
Controller | With digital programmable thermostat Optimum start feature |
CX6 |
£253.00 |
Controller | For use with volt-free signal from BMS (for 230V signal a VI Interface is required) | CX-BMS |
£137.00 |
Sensor | Optional remote sensor for use with CX1, CX2 or CX6 | CXS |
£42.00 |
Cable | Cat5 terminated 5m | DX05 |
£10.00 |
Cable | Cat5 terminated 10m | DX10 |
£15.00 |
Cable | Cat5 terminated 20m | DX20 |
£23.00 |
Joiner | Cat5 cable joiner | JX1 |
£5.50 |
How It Works
System X overdoor heaters provide a warm airstream across doorways and entrances. They are particularly well-suited to shops.
A system will include a controller and up to 12 individual heaters. The control daisy chain is connected using Cat5 cables ensuring the quickest possible installation time. Power is introduced to each heater individually with the controller taking its power from the first heater in the chain.
A unique feature of System X is that any style of heater from the range can be incorporated into a control daisy chain. For example, an overdoor heater could be added to a ceiling grid heater system. Heaters can be connected in any combination and any sequence.
Four over door heaters controlled from a single controller
Technical Specification
Colour: | White RAL9010 case with black grille |
Finish: | Epoxy polyester powder coating |
Construction: | 0.9mm steel case with white plastic end caps |
Mounting: |
Dual function steel brackets providing vertical air discharge or angled air discharge (9kW models – vertical discharge only) Alternatively 2 x M8 threaded holes are provided for suspension from drop rods |
Fan Assembly: |
Tangential fan with low noise aluminium fan blades Shaded pole high performance motor Factory lubricated bearings (servicing not required) |
Heating Element: | High quality nickel-chrome resistance wire supported by ceramic plates and fitted with an automatically resetting over-temperature device |
Control: | Up to 12 heaters can be connected to a single controller in any combination or sequence. Control connections are by Cat5 cable |
Installation: |
Dual function wall or ceiling mounting brackets providing vertical or angled discharge (9kW heater – vertical discharge only) |
Alternatively, 2 x M8 threaded holes are provided for suspension from drop rods | |
Recommended mounting heights 1.8m to 3m above floor level | |
Electrical Supply: |
All models can operate with a 230V 1ph supply |
XD-90 can also operate with a 400V 3ph & N supply |
|
Guarantee: |
1 year |
Performance Data
Model | kW | Volts | Airflow (m³/h) |
dB* | Mounting Height (m) |
XD30 | 3 | 230 | 245 | 56 | 1.8 to 3.0 |
XD60 | 6 | 230 | 490 | 58 | 1.8 to 3.0 |
XD90 | 9 | 400/230 | 735 | 58 | 1.8 to 3.0 |
* Noise levels are factory tested, not laboratory tested.
Physical data
Model | Width | Depth | Height | Weight (kg) |
XD30 | 635 | 108 | 225 | 7 |
XD60 | 1105 | 108 | 225 | 11.5 |
XD90 | 1620 | 108 | 225 | 17 |
An XD-90 providing a warm welcome to a hotel in Oxford
Technical Specifications – Controls
MODEL: CX1
Maximum number of heaters controlled: 12
Type of heaters controlled: any heaters from the System X range in any sequence
Electrical Supply: taken from heater via Cat5 cable
Heater settings: on/off/high heat/low heat/fan only
Built-in adjustable thermostat range: 0 to 30˚C
Connection to first heater in group: Cat5 cable
Mounting: surface mount
Dimensions: 120mm x 80mm x 40mm
Special Feature: Open window detection (user selectable)
Model: CX2
As CX1 but with a tamper resistant built-in thermostat
Model: CX3
As CX1 but without built-in thermostat or open window detection
Model: CX6
As CX1 but with:
7-day programmable timer
Temporary override
Temporary lock
Optimum start for enhanced economy (user selectable)
Without open window detection
Model: CX-BMS
As CX1 but without manual or thermostat control
Requires a volt-free signal from a BMS to switch heater on and off
Can operate with a 230V signal via a VI Interface
Model: CXS
Remote mounted sensor for use with CX1, CX2 or CX6 controller
Overrides the controller’s built-in air sensor
Recommended maximum cable length between controller and sensor: 20m
Mounting: surface mount
Dimensions: 80mm x 80mm x 35mm
Pre-terminated Cat5 Cables
DX05: 5m
DX10: 10m
DX20: 20m
JX1: Cat5 Joiner / Coupler – Click fit (Joins two Cat5 cables together should you require longer lengths)
Heater Selection
If you would like the experts at BN Thermic to select suitable heating for your application, please click here to access our enquiry form. Simply provide as much information as you have available and we will respond with a detailed proposal.
For best results, heaters should be selected to cover the entire door width.