Slash Installation Times with SystemX
Ideally suited to shops, SystemX allows any combination of four styles of commercial fan heaters to be controlled from a single point. The four styles of heaters are as follows.
- Ceiling heaters for 600 x 600 suspended ceiling grid
- Wall mounted/overdoor heaters
- Surface mount or suspended ceiling heaters
- Recessed ceiling heaters for use with a conventional ceiling or bulkhead
An example of SystemX operating 5 heaters from one controller
The XC-30 is commonly used by shop fitters and is
installed up out the way in a ceiling grid
Each heater style is available with various kW outputs.
SystemX controllers can be supplied with or without thermostats and provide high output, low output and fan only settings. The controllers themselves are sleek and stylish to suit the most prestigious installation.
What’s the best thing about SystemX?
Put quite simply, the best thing about SystemX is speed!
Because all control connections are made using pre-terminated Cat5 cable, installation time is reduced to an absolute minimum. In a case study, the time taken to install a system consisting of four 3kW heaters, a wall-mounted controller and thermostat was reduced by four hours when compared to a conventional system. It should also be noted that SystemX has been designed to ensure zero connection errors.
All SystemX heating systems can be easily controlled by one
controller/thermostat
Click here to have a closer look at SystemX and don’t hesitate to call 01293 547361 to discuss your heating requirements.
- Ceiling heaters for 600 x 600 suspended ceiling grid
- Wall mounted/overdoor heaters
- Surface mount or suspended ceiling heaters
- Recessed ceiling heaters for use with a conventional ceiling or bulkhead
An example of SystemX operating 5 heaters from one controller
The XC-30 is commonly used by shop fitters and is
installed up out the way in a ceiling grid
Each heater style is available with various kW outputs.
SystemX controllers can be supplied with or without thermostats and provide high output, low output and fan only settings. The controllers themselves are sleek and stylish to suit the most prestigious installation.
What’s the best thing about SystemX?
Put quite simply, the best thing about SystemX is speed!
Because all control connections are made using pre-terminated Cat5 cable, installation time is reduced to an absolute minimum. In a case study, the time taken to install a system consisting of four 3kW heaters, a wall-mounted controller and thermostat was reduced by four hours when compared to a conventional system. It should also be noted that SystemX has been designed to ensure zero connection errors.
All SystemX heating systems can be easily controlled by one
controller/thermostat
Click here to have a closer look at SystemX and don’t hesitate to call 01293 547361 to discuss your heating requirements.
